1st drive in the car for 2 months
Thread Starter
Advanced PassionFord User
Joined: May 2003
Posts: 2,442
Likes: 0
From: Workin on the car , or workin the missus
1st drive in the car for 2 months
filled all levels , double checked everything and off i went
.
.
.
.
.
.
.
.
.
.
.
.
.
I have striped all the excess weight out of the car, fettled the suspention ,
Chilly and damp weather but dry road .
20Psi @ 11deg charge temp
Fooooooooooooooooooooooooooooooooooooooooooooooook me
roll on monday 6th
.
.
.
.
.
.
.
.
.
.
.
.
.
I have striped all the excess weight out of the car, fettled the suspention ,
Chilly and damp weather but dry road .
20Psi @ 11deg charge temp
Fooooooooooooooooooooooooooooooooooooooooooooooook me
roll on monday 6th
Thread Starter
Advanced PassionFord User
Joined: May 2003
Posts: 2,442
Likes: 0
From: Workin on the car , or workin the missus
Gaz , Best pull ya finger out mate !!
Ballin , Yeah mate , have plumbed the water injection in aswell now but didnt seem to do anything with the temps that low anyway .
spose it cant evaporate / atomise when charge is cold ??
Ballin , Yeah mate , have plumbed the water injection in aswell now but didnt seem to do anything with the temps that low anyway .
spose it cant evaporate / atomise when charge is cold ??
Trending Topics
PassionFord Post Troll
iTrader: (3)
Joined: Jul 2004
Posts: 2,676
Likes: 0
From: Canvey Island, Essex
sounds wicked mate...
i'll be in contact soon lee-about my cage, might be just after christmas hopefully!!! still got your PM's about them ideas we went thru..
rich
Thread Starter
Advanced PassionFord User
Joined: May 2003
Posts: 2,442
Likes: 0
From: Workin on the car , or workin the missus
Rich , no worries mate .
Dan ,
mondeo 2.0 l block
bored to 86mm take vaux calibre turbo pistons , 7.6-1 comp ratio
Lightened and balanced bottom end with FRST ( EFI Xr3i ) flywheel
recon head but standard cams
FRST management , OFAC
T34 with .48 exhaust housing , 3inch straight through zorst ( ouch my ears )
zetec / ERST hybrid manifold
Escort 1.8 zetec inlet manifold with 2.0l hybrid throttle body ( basicly a 130hp Xr3i inlet system)
tripple core cossy cooler ( 3 X 2wd cores welded together )
MSD evo live map with 400cc injectors ( thanks KENNY )
water injection but not yet used it
think thats it , oh and ARP to hold it all together
Dan ,
mondeo 2.0 l block
bored to 86mm take vaux calibre turbo pistons , 7.6-1 comp ratio
Lightened and balanced bottom end with FRST ( EFI Xr3i ) flywheel
recon head but standard cams
FRST management , OFAC
T34 with .48 exhaust housing , 3inch straight through zorst ( ouch my ears )
zetec / ERST hybrid manifold
Escort 1.8 zetec inlet manifold with 2.0l hybrid throttle body ( basicly a 130hp Xr3i inlet system)
tripple core cossy cooler ( 3 X 2wd cores welded together )
MSD evo live map with 400cc injectors ( thanks KENNY
)water injection but not yet used it
think thats it , oh and ARP to hold it all together
PassionFord Post Troll
iTrader: (3)
Joined: Jul 2004
Posts: 2,676
Likes: 0
From: Canvey Island, Essex
Originally Posted by Lee @ Fusion
Rich , no worries mate .
mondeo 2.0 l block
bored to 86mm take vaux calibre turbo pistons , 7.6-1 comp ratio
Lightened and balanced bottom end with FRST ( EFI Xr3i ) flywheel
recon head but standard cams
FRST management , OFAC
T34 with .48 exhaust housing , 3inch straight through zorst ( ouch my ears )
zetec / ERST hybrid manifold
Escort 1.8 zetec inlet manifold with 2.0l hybrid throttle body ( basicly a 130hp Xr3i inlet system)
tripple core cossy cooler ( 3 X 2wd cores welded together )
MSD evo live map with 400cc injectors ( thanks KENNY )
water injection but not yet used it
think thats it , oh and ARP to hold it all together
mondeo 2.0 l block
bored to 86mm take vaux calibre turbo pistons , 7.6-1 comp ratio
Lightened and balanced bottom end with FRST ( EFI Xr3i ) flywheel
recon head but standard cams
FRST management , OFAC
T34 with .48 exhaust housing , 3inch straight through zorst ( ouch my ears )
zetec / ERST hybrid manifold
Escort 1.8 zetec inlet manifold with 2.0l hybrid throttle body ( basicly a 130hp Xr3i inlet system)
tripple core cossy cooler ( 3 X 2wd cores welded together )
MSD evo live map with 400cc injectors ( thanks KENNY
)water injection but not yet used it
think thats it , oh and ARP to hold it all together
i'm in the process of collecting everyting for a 2L zetec turbo for my fezzy.. hopefully start the build in the new year-whenever my bro gets his series 1 out of the garage 
.... what have you got this lot in?!?escort 
not sure when i'll be up to see ya mate... but it will definately be after xmas...
Thread Starter
Advanced PassionFord User
Joined: May 2003
Posts: 2,442
Likes: 0
From: Workin on the car , or workin the missus
its in a escort mate ,
Just finishing my mates 1.8 FRST off , pretty much the samer as mine but on a 1.8 engine
Phill , is she all mapped then mate ???
Just finishing my mates 1.8 FRST off , pretty much the samer as mine but on a 1.8 engine
Phill , is she all mapped then mate ???
Thread
Thread Starter
Forum
Replies
Last Post