here we have my head that i got to repair but now selling due to wanting to just buy one to blod straight on.

just that bare head no valves etc or caps.

needs a repair it was thought to have 3 hairline cracks but it is only 2 and what ive now found out is a couple of marks. needs a skim but it has only EVER had 1 VERY light skim so there is plenty of meat on it .

i was told it could possibly be a rick woods cnc head its hand stamped on the front "CNC195"

www.cncheads.com

any questons just ask . im looking for offers.

http://
http://
http://

 

Mate , a cossie head without the caps is worth nothing , the heads are line boared with the caps , this means caps need to stay with the head as you cant swap them from head to head

 

What he said

 

Unless you find a set of caps and have them decked and the whole lot re line bored which would be costly and then the repair on top

Paul

 

thats what i was going to do but decided to take the easyer route.

as mentioned above could have some caps line bored to suit . ideal if someone is in the mechining game .

i know its not worth much but thought id bung it on here as its just sitting in my engine room in the way and its a bit big for a paper weight lol

 

i wouldnt want to swap a hole set of caps but myself and and another guy i know have done it with just one lost cap and thankfully enough no scoring