my new head is back
Trending Topics
PassionFord Post Whore!!
Joined: Nov 2006
Posts: 3,538
Likes: 0
From: .
Looks good mate! Thinking of getting one done as well - if you don't mind me asking what's the thickness on it (as in have you had loads of work done to a head with a few skims left, or near the last?)
see your other thread mate i answered your question on there
head thckness is 138.7,i wouldnt spend so much money on a totally skimmed head
but saying that my last was down to it and had no issues with non pocketed pistons and pair of bd14s
head thckness is 138.7,i wouldnt spend so much money on a totally skimmed head
but saying that my last was down to it and had no issues with non pocketed pistons and pair of bd14s
think he wants me to go omex as he will have most of the map
he looked up the gotech while i was on the phone,he says it has good features but unsure of where its from and what like the customer service after would be like
as for collins he reckons will have to wait and see how neils goes
10K+ Poster!!
Joined: May 2004
Posts: 14,907
Likes: 1
From: scotland
think he wants me to go omex as he will have most of the map
he looked up the gotech while i was on the phone,he says it has good features but unsure of where its from and what like the customer service after would be like
as for collins he reckons will have to wait and see how neils goes
he looked up the gotech while i was on the phone,he says it has good features but unsure of where its from and what like the customer service after would be like
as for collins he reckons will have to wait and see how neils goes
All down to timescale aint it.
Advanced PassionFord User
Joined: Aug 2003
Posts: 1,978
Likes: 0
col if you have chosen someone for mapping i would think about using something they are familiar with as it should allow a much faster turnaround and not throw up any hardware/software funnies etc that can often happen going to new ecus. Experience/quality over competitive price as long as it has a good resale value.
col if you have chosen someone for mapping i would think about using something they are familiar with as it should allow a much faster turnaround and not throw up any hardware/software funnies etc that can often happen going to new ecus. Experience/quality over competitive price as long as it has a good resale value.
yeah i know thats what i mean mate but
simon has done a few and is very used to the gotech systems,and reckons 2 days for mapping,just need to trailer it up
pitlochery not that far with the bm towing it lol
simon has done a few and is very used to the gotech systems,and reckons 2 days for mapping,just need to trailer it up
pitlochery not that far with the bm towing it lol
10K+ Poster!!
Joined: May 2004
Posts: 14,907
Likes: 1
From: scotland
10K+ Poster!!
Joined: May 2004
Posts: 14,907
Likes: 1
From: scotland
The maps are just all numbers col.....they make no sense to the untrained eye.
I have seen alan map my car tons of times, had Mark talk me thru a few changes of the map over the phone etc and still couldnt tell a good map from a bad one just by looking at it, they are THAT complicated.
Will be interesting to see what power Si can get out of it if he does map it
I have seen alan map my car tons of times, had Mark talk me thru a few changes of the map over the phone etc and still couldnt tell a good map from a bad one just by looking at it, they are THAT complicated.
Will be interesting to see what power Si can get out of it if he does map it
PassionFord Regular
Joined: Feb 2007
Posts: 353
Likes: 0
From: Bo'ness
timescales :-( when it comes to tuning cars this must be one of the worst things, it always seems to take longer than you would expect....hopefully not much longer til i get mines back tho....
Last edited by black scoob; Mar 13, 2008 at 12:04 AM.
Thread
Thread Starter
Forum
Replies
Last Post
ekjim
General Car Related Discussion.
6
Aug 17, 2015 08:57 PM
CabrioTurbo
General Car Related Discussion.
1
Aug 1, 2015 11:04 AM