For sale I have a brand new pro alloy racing fuel tank. It is a pro tank - PT800.

The tank measures approx 200mm high x 340mm wide x 800mm long. The tank has a capacity of 56 liters.

It is foam filled, Fitted with an aero 400 flush, Rubber spill tray, breather and roll over valve, -8 return and -10 feed fittings.

It is also fitted with a build in swirl pot and sender unit to stop any fuel starvation. A standard or seperate fuel gauge can be wired up to read how much fuel is in the tank.

It also come with two stainless steel fixing mounts and two rubber starps, with nuts, bolts and washers for fixings.

This is a top of the range fuel tank and was custom made for my fiesta cosworth that I was building. I have now sold the fiesta and no longer require the fuel tank

The fuel tank cost me just short of 900 pounds and has only been removed from the box once for the pictures. It is still sat in its original box and wrapped up securly. Have a look on pro alloys website just to see how much these things cost for a very basic tank. My tank has all the basics, extras and includes V.A.T.

http://www.proalloy.co.uk/cgi-bin/si...79&id=proalloy

Now 550 pounds delivered

Thanks

 

BTTT

 

I have an Escort cosworth custom interior consisting of Cobra daytona front seats and standard rear all trimmed in red and black alcantara with door car inserts and center consol cover. The retrim alone cost Ł1100 so I would be looking for a straight swap, let me know if you are intrested and I'll sort out some photo's, the seat's are in imaculate condition.

 

Pm sent Jim!

 

BTTT

 

 

You open to offers on this if so pm me and we'll see if we can come to some sort of arangment

 

Yes mate! Open to offers!

 

whats ya phone number?

 

PM sent!

 

Reduced!

Now 550 pounds delivered. Absoulte bargin!

 

hi mate

i am intrested but wrong time form me bit skint at the min

good luck with the sale

marco

 

Chears marco!

 

hi mate

if you have still got it in a month or so i should have the funds for it


marco

 

you still got this

 

BTT for a mincer

 

i'm interested

 

SOLD