General Car Related Discussion. To discuss anything that is related to cars and automotive technology that doesnt naturally fit into another forum catagory.

There is light at the end of my LONG cossie tunnel at last!

Thread Tools
 
Search this Thread
 
Old Jun 22, 2007 | 09:39 AM
  #1  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default There is light at the end of my LONG cossie tunnel at last!

Well its been a long time coming but at last my cossie is slowly getting ready to hit the road once again There have been LOADS of wee hurdles trying to stop me but hopefully we're almost there

I melted a piston last august and it was just as the mot and ins were up so i stuck it in the garage and concentrated on saving for my wedding. Slowly in the back ground i aquired a new bottom end that was basically just run in and set up before the car got written off. A few weeks back i decided to start the ball rolling as my pal Rob wants to use the car for part of his wedding. Now at this point i thought it'd be relatively simple to sort but OMG its been problem after problem.

Bottom end went in ok so that was fine. Then we went to bleed the brakes to move the car back home from the garage. Out of 8 bleed nipples on my AP 4 pots, 2 snapped and one was already missing and blocked We tried to remove the broken nipples and basically they were stuck and the caliper cracked on BOTH nipples so think i need a new one

MEGA MEGA thanks go out to Paul (RS Toughy) who has leant me standard front brake set up to move the car

Next problem was my old head which was under thickness and needing skimmed Eventually i got a head which then needed 3 exhaust stud threads re done and then 1 of the threads holding cam cap down was stripped too the seller covered most of these costs so fair play. I decided then to bite the bullet and get cam seals done and reseat valves. Glad i did as they found a bent valve! Head was supposed to have been pressure tested too Got head back on wed am and thought we'd get car together. When torquing the cam caps up guess what happened? 2 more cam cap threads were stripped! Put it back to head shop who did me a huge favour and fixed them yesterday.

Last night my pal Rob put the head back together and back in the car at last. Most bits and bobs are connected. Just need to do a breather hose, re run oil cooler pipes, set timin, do timin belt, fit new 500 intercooler and rad and we're ready to fire up

At least the engine bay almost looks like it should!

Fingers crossed the car should run this weekend


Chop

PS anyone gonna run a book on something going wrong?

PPS HUGE big up himself to Robin who has been a legend
Reply
Old Jun 22, 2007 | 09:40 AM
  #2  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

Jesus how much did i type?

Ginge how can you be arsed making EVERY post like that?
Reply
Old Jun 22, 2007 | 10:02 AM
  #3  
Redkop's Avatar
Redkop
Member No: 39
 
Joined: May 2003
Posts: 8,263
Likes: 0
From: UK
Default

Originally Posted by Lambchop
Jesus how much did i type?

Ginge how can you be arsed making EVERY post like that?


Glad to hear that things have progressed Chop
Reply
Old Jun 22, 2007 | 10:14 AM
  #4  
STUCOS's Avatar
STUCOS
PassionFord Post Whore!!
iTrader: (8)
 
Joined: May 2003
Posts: 5,061
Likes: 0
From: side way some were in tayside
Default

Chop if it wasnt for bad luck youd hae nae luck,hope all goes well mate


cheeRS stu
Reply
Old Jun 22, 2007 | 10:27 AM
  #5  
Lee_R21Turbo's Avatar
Lee_R21Turbo
PassionFord Post Whore!!
iTrader: (1)
 
Joined: May 2004
Posts: 4,715
Likes: 0
From: Liverpool :o)
Default

Nice one Chop, glad your getting it sorted properly at last mate!!

Bummer about the APs tho eh!!!
Reply
Old Jun 22, 2007 | 10:36 AM
  #6  
Rhys's Avatar
Rhys
15K+ Super Poster!!
 
Joined: May 2003
Posts: 18,745
Likes: 0
From: South Wales, GB
Default

Nice one Chop, be you cant wait to get it running all ok
Reply
Old Jun 22, 2007 | 10:43 AM
  #7  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

Originally Posted by STUCOS
Chop if it wasnt for bad luck youd hae nae luck,hope all goes well mate

cheeRS stu
pmsl! so true mate!

Originally Posted by Lee_R21Turbo
Nice one Chop, glad your getting it sorted properly at last mate!!

Bummer about the APs tho eh!!!

Total WANK about the fucking AP's. Now because i have nice big brakes i CANT degrade
Typically the CP5000's i have are more expensive than the 5200's
I've been quoted Ł400 odd on a replacement or can get a pair of 5200's for Ł490 odd.
I might swap bloody calipers

Originally Posted by Rhys
Nice one Chop, be you cant wait to get it running all ok
Understatement of the year goes to Rhys
Yeah mate cant wait!



Its 4 weeks today until my wedding
I need the car running, taxed, insured, run in and tuned by then because robs wedding is 2 wks 2 days after mine and thats when car is needed. I come home from honeymoon day before his so car HAS to be ready
Reply
Old Jun 22, 2007 | 10:51 AM
  #8  
Lee_R21Turbo's Avatar
Lee_R21Turbo
PassionFord Post Whore!!
iTrader: (1)
 
Joined: May 2004
Posts: 4,715
Likes: 0
From: Liverpool :o)
Default

Chop....I'd buy the pair then sell your old one!!! Ebay it! LOL!
Reply
Old Jun 22, 2007 | 11:06 AM
  #9  
smitsturbo's Avatar
smitsturbo
PassionFord Post Whore!!
 
Joined: Oct 2005
Posts: 7,346
Likes: 0
From: aberdeenshire
Default

think your self lucky mate as doing body work is a right bastard

no but youve done well, hopefully we'll all get out of this restoration trench sometime & get a meet orginised
Reply
Old Jun 22, 2007 | 11:08 AM
  #10  
Billabong's Avatar
Billabong
PassionFord Post Whore!!
 
Joined: May 2003
Posts: 9,076
Likes: 0
From: Northants
Default

Hope all goes well for the startup Chop.
Reply
Old Jun 22, 2007 | 11:10 AM
  #11  
lamb chops's Avatar
lamb chops
PassionFord Post Whore!!
 
Joined: Apr 2004
Posts: 4,047
Likes: 0
From: Waterlooville....near Portsmouth
Default

Sounds like she wont be long now!! Good luck with it all fella
Reply
Old Jun 22, 2007 | 11:27 AM
  #12  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

Lee
I just dont know how well it'd sell on ebay! i've been looking for one and cant find one so either A. no fucker wants them so i'd get FA or B. They are rare and i'd get lots

smits
agreed, i'd FAR rather do mechanical than bodywork. DOne a fair bit to mine now and tbh its in v good nick all round

Bill
cheers, cross your fingers now

Lamb chops the imposter
hopefully not long no. Just trying to organise a crack team of commando mechanics to help me this weekend
Reply
Old Jun 22, 2007 | 11:29 AM
  #13  
rstoughy's Avatar
rstoughy
PassionFord Post Whore!!
20 Year Member
iTrader: (5)
 
Joined: May 2004
Posts: 4,320
Likes: 0
From: onshore at the moment
Default

Be nice to see the old girl back on the road again

Big up to Rob for all the help he's given top guy
Reply
Old Jun 22, 2007 | 11:30 AM
  #14  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

Originally Posted by rstoughy
Be nice to see the old girl back on the road again
Yup you're evo is gonna munch cossie dust

Not free tomorrow are ya? Petrol and lunch covered?
Reply
Old Jun 22, 2007 | 11:36 AM
  #15  
rstoughy's Avatar
rstoughy
PassionFord Post Whore!!
20 Year Member
iTrader: (5)
 
Joined: May 2004
Posts: 4,320
Likes: 0
From: onshore at the moment
Default

Originally Posted by Lambchop
Originally Posted by rstoughy
Be nice to see the old girl back on the road again
Yup you're evo is gonna munch cossie dust

Not free tomorrow are ya? Petrol and lunch covered?



Might manage to spare a little time but im out the night
Reply
Old Jun 22, 2007 | 11:45 AM
  #16  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

Originally Posted by rstoughy
Originally Posted by Lambchop
Originally Posted by rstoughy
Be nice to see the old girl back on the road again
Yup you're evo is gonna munch cossie dust

Not free tomorrow are ya? Petrol and lunch covered?



Might manage to spare a little time but im out the night
haha enjoy your night out then

If you're particularly bored tomorrow then give me a shout.
Reply
Old Jun 22, 2007 | 04:09 PM
  #17  
KSA-Cossie's Avatar
KSA-Cossie
Professional Waffler
iTrader: (4)
 
Joined: May 2004
Posts: 25,439
Likes: 19
From: Shutting down jap crap
Default

Good news chop .
Reply
Old Jun 22, 2007 | 04:32 PM
  #18  
fuzzy's Avatar
fuzzy
14000+ post superhero
 
Joined: Oct 2005
Posts: 17,461
Likes: 490
From: upside down in a field
Default

its great when you finally get them on the road but dont do what i did and crash it less than 24 hours after completion.dam that unfamiliar extra power
Reply
Old Jun 26, 2007 | 06:12 AM
  #19  
rstoughy's Avatar
rstoughy
PassionFord Post Whore!!
20 Year Member
iTrader: (5)
 
Joined: May 2004
Posts: 4,320
Likes: 0
From: onshore at the moment
Default

Update?????

Is it going then????

Reply
Old Jun 26, 2007 | 06:23 AM
  #20  
Charlie Chalk's Avatar
Charlie Chalk
Unknown.
iTrader: (1)
 
Joined: Oct 2003
Posts: 50,873
Likes: 1
From: ...
Default

Good luck Chop
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Karl 3dr
Pictures, video & Photoshop Forum
102
Oct 14, 2016 08:17 PM
steerfromdarear
Restorations, Rebuilds & Projects.
28
Jan 29, 2016 06:14 PM
Toe Knee
Cars & Parts Wanted.
1
Aug 23, 2015 08:31 AM
wheelwizardrefurbs
Technical help Q & A
4
Aug 15, 2015 05:54 PM
Billy_RS
Cars & Parts Wanted.
1
Aug 3, 2015 08:43 PM




All times are GMT. The time now is 08:36 PM.