Andy Gallacher,s focus cosworth (small vid page 9)
Thread Starter
15K+ Super Poster!!
iTrader: (4)
Joined: Mar 2005
Posts: 17,278
Likes: 27
From: Ayrshire (the bronx)
Andy Gallacher,s focus cosworth (small vid page 9)
I went up tonight after work n took a good few pics.I decided to start a new thread with pics from the camera instead of the other pics from camera phone.........
Pipe bender & guilitine above for fabrication & roll cages
Look how close the rocker cover is to the bonnet he has raised the engine
so the driveshafts arent at a bad angle he wants it sooo low
This is a pic of a new fiesta shell from Msport andy put a cage in
Paul@northyorks old escos track car in for a engine rebuild
This is a customers black focus cossie near completion. a real sleeper
Andys old focus owned by his mate & just waiting on a loom from PROMETHIOUS (hurry frazer)
This is his mates escort cosworth built from a new motorsport shell interior everything bar the runing gear. its small turbo & dosent need much to finnish it could be on a 07 plate watch out for it.The owner works away alot.
I will update this every other day
Pipe bender & guilitine above for fabrication & roll cages
Look how close the rocker cover is to the bonnet he has raised the engine
so the driveshafts arent at a bad angle he wants it sooo low
This is a pic of a new fiesta shell from Msport andy put a cage in
Paul@northyorks old escos track car in for a engine rebuild
This is a customers black focus cossie near completion. a real sleeper
Andys old focus owned by his mate & just waiting on a loom from PROMETHIOUS (hurry frazer)
This is his mates escort cosworth built from a new motorsport shell interior everything bar the runing gear. its small turbo & dosent need much to finnish it could be on a 07 plate watch out for it.The owner works away alot.
I will update this every other day
An ambitious project no doubt and fair play for having a go I think I would have tried to use more of the original floor and bulkhead and cut out areas needed and then fabricate a tunnel to match rather than weld in a Sierra bits or just go tube chassis and sheet alloy it . Will be good to see it progress though
I think I would have tried to use more of the original floor and bulkhead and cut out areas needed and then fabricate a tunnel to match rather than weld in a Sierra bits or just go tube chassis and sheet alloy it . Will be good to see it progress though
Thread Starter
15K+ Super Poster!!
iTrader: (4)
Joined: Mar 2005
Posts: 17,278
Likes: 27
From: Ayrshire (the bronx)
Forgot these two pics of the engine..It is a harvey gibbs engine dynod at 618bhp...
Last year it was on ava,s rolling road it made 487bhp at the 4 wheels
Trending Topics
Some awsome cars being built there 
I would love a rwd focus built by Andrew
Carlo
What happened to my old track car
the new owner cant have had it long ,,did it blow up or is he just going for a better spec ??
Paul
I would love a rwd focus built by Andrew
Carlo
What happened to my old track car
the new owner cant have had it long ,,did it blow up or is he just going for a better spec ??Paul
Thread Starter
15K+ Super Poster!!
iTrader: (4)
Joined: Mar 2005
Posts: 17,278
Likes: 27
From: Ayrshire (the bronx)
NORTH YORKS RS SPARES
Carlo
What happened to my old track car the new owner cant have had it long ,,did it blow up or is he just going for a better spec ??
As far as im aware it blew up paul not sure the reason think its a boy from fife that has it now.
Carlo
What happened to my old track car the new owner cant have had it long ,,did it blow up or is he just going for a better spec ??
As far as im aware it blew up paul not sure the reason think its a boy from fife that has it now.
PassionFord Post Troll
Joined: Dec 2005
Posts: 2,511
Likes: 0
From: Near Glasgow
Originally Posted by NORTH YORKS RS SPARES
Some awsome cars being built there
I would love a rwd focus built by Andrew
Carlo
What happened to my old track car the new owner cant have had it long ,,did it blow up or is he just going for a better spec ??
Paul
I would love a rwd focus built by Andrew
Carlo
What happened to my old track car
the new owner cant have had it long ,,did it blow up or is he just going for a better spec ??Paul
Originally Posted by Ollie6RS2
Originally Posted by NORTH YORKS RS SPARES
Some awsome cars being built there
I would love a rwd focus built by Andrew
Carlo
What happened to my old track car the new owner cant have had it long ,,did it blow up or is he just going for a better spec ??
Paul
I would love a rwd focus built by Andrew
Carlo
What happened to my old track car
the new owner cant have had it long ,,did it blow up or is he just going for a better spec ??Paul
somone must be giving it a propper thrashing sorry to hear that tho
Awsome fabrication work and out of the norm thinking, after looking at the build pics of his fiesta this thing will turn out amazing
Have the regs changed in the race championship or are they going in another group, as i thought they had to stop using the focus and fiesta bacause they were never 4x4 from the factory?
Have the regs changed in the race championship or are they going in another group, as i thought they had to stop using the focus and fiesta bacause they were never 4x4 from the factory?
20K+ Super Poster.
Joined: Jun 2003
Posts: 22,888
Likes: 0
From: Local, when i'm home...
Originally Posted by NEIL A
Have the regs changed in the race championship or are they going in another group, as i thought they had to stop using the focus and fiesta bacause they were never 4x4 from the factory?
Thread Starter
15K+ Super Poster!!
iTrader: (4)
Joined: Mar 2005
Posts: 17,278
Likes: 27
From: Ayrshire (the bronx)
The black focus cosie is stage 3 t34 l8 pectel board ect...just back from the loom getting made by fzaror (PROMETHIOUS) gaz coilovers & white racelines just looks like a standard focus lowerd..a real sleeper its 2wd too just needs brake lines & a fuel tank should be ready in the next few weeks....its got 330mm front discs & monster AP,s...escort cosworth grey hex recaro interior.i will take more pics the next time im up..im going on holiday for a week so there should be good updates when i come back..
Im not sure they are going to race in the mill street motors ford saloons this year. but i know they are entering in saloon car racing but not sure what one i will ask the question tho
just needs brake lines & a fuel tank should be ready in the next few weeks....its got 330mm front discs & monster AP,s...escort cosworth grey hex recaro interior.i will take more pics the next time im up..im going on holiday for a week so there should be good updates when i come back..Im not sure they are going to race in the mill street motors ford saloons this year. but i know they are entering in saloon car racing but not sure what one i will ask the question tho
Too many posts.. I need a life!!
Joined: Mar 2005
Posts: 683
Likes: 0
From: somewhere between bournemouth & southampton
Originally Posted by martin-reyland
An ambitious project no doubt and fair play for having a go I think I would have tried to use more of the original floor and bulkhead and cut out areas needed and then fabricate a tunnel to match rather than weld in a Sierra bits or just go tube chassis and sheet alloy it . Will be good to see it progress though
I think I would have tried to use more of the original floor and bulkhead and cut out areas needed and then fabricate a tunnel to match rather than weld in a Sierra bits or just go tube chassis and sheet alloy it . Will be good to see it progress though Wicked pics Carlo, keep the updates coming