Mk5 zs puma conversion help?
24-03-2013, 06:00 PM
#1
Virgin
Thread Starter
Join Date: Feb 2013
Location: Nottingham
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Mk5 zs puma conversion help?
I have got a 2001 zs and have got the engine out just need to put the puma in but the wiring loom dosnt seem to plug in like I got told the ecu is a MUFF if that help. Just could do with some advise on how to get on? Weather the loom is for an analouge engine or not ? 
thanks
thanks
24-03-2013, 07:05 PM
#2
I've found that life I needed.. It's HERE!!
I done this conversion years ago , but I had a analogue puma , like I had the whole car as I ended up pulling the whole loom out and swoping it over as the loom I had and car did not seem compatable
11-04-2013, 08:23 PM
#3
Too many posts.. I need a life!!
iTrader: (3)
Join Date: Dec 2007
Location: buckinghamshire
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
What reg was the puma? I'm shaw if your car is a 2001 you will need the puma wiring from a 2000-2002 puma, I'm doing my w reg fiesta and I bought a x reg puma to use as my donor?
and then it should be ok
12-04-2013, 04:18 AM
#5
Virgin
Thread Starter
Join Date: Feb 2013
Location: Nottingham
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
The engine is a 2001 same as the fiesta we think the problem is down the security side so the immobiliser isn't letting the engine start. Thanks for your help so far 
Thread
Thread Starter
Forum
Replies
Last Post
mk3ste
Restorations, Rebuilds & Projects.
19
17-10-2021 10:09 AM
SMILER258
Restorations, Rebuilds & Projects.
36
28-09-2015 09:04 AM
