Just wondering if anyone has/could help with fitting the Zetec S dials to Fiesta flight. Unfortunately I currently have the dials without the tachometer, its the 1300 model, but I've seen somebody who successfully fitted the Zetec S dials but never mentioned how they went about it. Any help would be appreciated, I'm a newbie on here so If you could let me know what I need that would be great!

 

Just fit them.if you have a digital speedo they will just plug and play.i fitted a zetec s cluster to the other halfs fiesta and it works ok

 

Digital speedo? I have the digital dash as in the mileage is digital if that's what you mean? The cluster I have is this one right here

 

If thats the one you have a zetec s one will be plug and play

 

Ok that's not a problem, is it difficult to do?, I can't find anything on here telling me how to go about it, what I need etc.

 

To remove the cluster you need to remove the surround.its held in by a phillips screw in the corner by the vents covered by a cap.the rest of it is cliped in place.then remove the cluster.think its 4 screwa then unplug the old cluster and plug the new one in and refit it all.thats it.then it will work

 

Okay cheers mate i'll give it a go when it arrives!