2006 Modifications
Thread Starter
PassionFord Post Whore!!
iTrader: (23)
Joined: Dec 2004
Posts: 9,665
Likes: 16
From: The North
What mods have people got on the cards for the 2006 season??
Mines having bodywork touch-ups done at the moment and soon to be fitted with the 3dr cos rims just waiting for the 195/45's
Mines having bodywork touch-ups done at the moment and soon to be fitted with the 3dr cos rims just waiting for the 195/45's
mines also in the bodyshop getting some touch ups, lowered the front a bit more, fitted a laguna splitter, re- located the front number plate.
And lots of polishing, ready for a cruising summer.
Would have had your morettes to if i had enough money
And lots of polishing, ready for a cruising summer.
Would have had your morettes to if i had enough money
Thread Starter
PassionFord Post Whore!!
iTrader: (23)
Joined: Dec 2004
Posts: 9,665
Likes: 16
From: The North
They have gone now mate, shame they would have looked mint on your car.
I'm well looking forward to FITP, There seems to be loads of standard and mint looking fiesta's popping up everywhere at the moment
Praying for SUN
I'm well looking forward to FITP, There seems to be loads of standard and mint looking fiesta's popping up everywhere at the moment
Praying for SUN
i wish my car was as mint as you guys, i have hardcore rot around my filler cap and i need to get 2 new door before i even think of showing it so there will be no fitp for me this year. i am however going to rwyb on april the 8th or 9th should be cool
Trending Topics
Thread Starter
PassionFord Post Whore!!
iTrader: (23)
Joined: Dec 2004
Posts: 9,665
Likes: 16
From: The North
Originally Posted by Oranoco
Fiesta is going to get a decent intercooler and some proper stoppers as 200bhp with stock brakes is slightly worrying 

I worry with mine and i'm 40 brake down on you steve.
1. get new bonnet painted that is currently in my room lol
2. cossie stoppers
3. get 200 bhp at lower boost
4. replace a few bits like, side reps, drivers doorcard etc etc just to get her MINT again.
5. full underside rebuild (late summer)
eventually
6. 2.1 ZVH with hybrid t3 and aftermarket managment.
2. cossie stoppers
3. get 200 bhp at lower boost
4. replace a few bits like, side reps, drivers doorcard etc etc just to get her MINT again.
5. full underside rebuild (late summer)
eventually
6. 2.1 ZVH with hybrid t3 and aftermarket managment.
I have a few but they wont all get done this year
1. full respray
2. uprated gearbox
3. rear disc converstion
4. maybe 280bhp worth of ZT as Im getting bored with the 2ltr already and need more power
1. full respray
2. uprated gearbox
3. rear disc converstion
4. maybe 280bhp worth of ZT as Im getting bored with the 2ltr already and need more power
Fit roll cage and 6 point harnesses ive had sitting about for 3 months and remove the shitty Halfords bonnet pins that rust within 24hrs and replace with some Sparco pins.
Then get some more track days in
Then get some more track days in
next couple of weeks:
engine out
erst clutch
erst box
new mounts
new loom+ecu
ally dash
summer:
2.0 zetec, provisionally bought the engine and some ARP bolts, heads getting worked, cams reprofiled, bottom end balanced and rebuilt by yours truely, bought some bike throttle bodies for it and will run it on MS.
when the mots up in october its coming off the road for winter for:
front wings off for A pillar repairs
new rear 1/4 panel
new front wings,
fibreglass panels
respray
tubular rose jointed suspension setup.
gonna be a busy and expensive year for me
engine out
erst clutch
erst box
new mounts
new loom+ecu
ally dash
summer:
2.0 zetec, provisionally bought the engine and some ARP bolts, heads getting worked, cams reprofiled, bottom end balanced and rebuilt by yours truely, bought some bike throttle bodies for it and will run it on MS.
when the mots up in october its coming off the road for winter for:
front wings off for A pillar repairs
new rear 1/4 panel
new front wings,
fibreglass panels
respray
tubular rose jointed suspension setup.
gonna be a busy and expensive year for me
this week put my new engine in 1600 cvh with an escort s2 box
later in the year mint the body work up and go for a t3 convertion and 200bhp on cossie management or something along them lines lol
later in the year mint the body work up and go for a t3 convertion and 200bhp on cossie management or something along them lines lol
fit cossie t3 and -31
fit the escos rims
get and fit a front mount
get sum new stoppers fitted
mop the whole car fit a erst lsd box
fit the chip and injectors
fit the cam and springs
possible get a half cage dependin on if i want 1
all this year
fit the escos rims
get and fit a front mount
get sum new stoppers fitted
mop the whole car fit a erst lsd box
fit the chip and injectors
fit the cam and springs
possible get a half cage dependin on if i want 1
all this year
BEFORE FITP:
Fix the problem with it smoking
Get it through its MOT
Put a new tailgate ion it
Put a new front bumper on it
AFTER FITP
Get the bodywork sorted out i.e. new rear quarter, new front wing and possibly 2 new doors
Build a new engine to go in it ready for next year
Sit back and play the waiting game of the current one to blow up!!
Fix the problem with it smoking
Get it through its MOT
Put a new tailgate ion it
Put a new front bumper on it
AFTER FITP
Get the bodywork sorted out i.e. new rear quarter, new front wing and possibly 2 new doors
Build a new engine to go in it ready for next year
Sit back and play the waiting game of the current one to blow up!!
Thread
Thread Starter
Forum
Replies
Last Post



