T3 wanted
#1
PassionFord Regular
Thread Starter
Join Date: Jul 2010
Location: Dundee, Scotland
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
T3 or hybrid wanted for my xr3i - Zetec Turbo conversion. Must be in good order.
Also looking for Megasquirt kit (v2 or above), rear disc conversion and a front mounted intercooler.
Also looking for Megasquirt kit (v2 or above), rear disc conversion and a front mounted intercooler.
#2
PassionFord Post Troll
![Default](https://passionford.com/forum/images/icons/icon1.gif)
hi mate, got a spare T3 with the RS Turbo i bought yesterday.
Its still attached to ERST manifold, with actuator etc and compressor housing looks new however the rear oil seal needs replaced. £50 if any good to you, i'm not far away either.
CheeRS
Its still attached to ERST manifold, with actuator etc and compressor housing looks new however the rear oil seal needs replaced. £50 if any good to you, i'm not far away either.
CheeRS
#3
Bodger of Blackburn
iTrader: (2)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
i have a 4wd cosworth turbo, just the same as a stage 3 turbo bar the 360 degree thrust bearing.
i'm after £150 for this as it has a collins actuator with barely used spring installed and modified bracket to keep good clearance from the radiator.
i also have a custom down pipe so it clears all ancillaries and maintains good flow, perfect for the 3 bolt housing, with lambda boss 2.5" pipe.
this will be an additional £100
minimal movement in shaft as expected from journal bearings, nothing more.
can do a deal with postage for all the above if you like, ran the same turbo on my zvh peaking at 23psi, ideal for ZT/zvh circa 300bhp
cheers
sean
i have a video of this running in car, no smoke etc.
i'm after £150 for this as it has a collins actuator with barely used spring installed and modified bracket to keep good clearance from the radiator.
i also have a custom down pipe so it clears all ancillaries and maintains good flow, perfect for the 3 bolt housing, with lambda boss 2.5" pipe.
this will be an additional £100
minimal movement in shaft as expected from journal bearings, nothing more.
can do a deal with postage for all the above if you like, ran the same turbo on my zvh peaking at 23psi, ideal for ZT/zvh circa 300bhp
cheers
sean
i have a video of this running in car, no smoke etc.
Last edited by xr2wishy; 21-02-2011 at 12:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
steerfromdarear
Restorations, Rebuilds & Projects.
28
29-01-2016 06:14 PM
Ben26
Pictures, video & Photoshop Forum
10
27-08-2015 08:56 PM