Thread: MY DYNO FIGURES
View Single Post
Old Jun 29, 2004 | 10:06 PM
  #1  
Anonymous's Avatar
Anonymous
Banned
 
Joined: Dec 2002
Posts: 142
Likes: 1
Default MY DYNO FIGURES

Hi

My engine was Dynoed today at Norris Designs. I will give the figures & a few thoughts on the day, full results etc will be posted later.
Mark had promised 600bhp/500ft/lb with the probable help of race fuel.
That was not required & on Pump Fuel (Optimax) it made 613.8bhp & 507.8ft/lb this was achieved with 32psi of Boost. Higher Boost was not tried because Mark/Simon agreed we had hit the 'sweet spot' so the champagne was broken out or in this case tea.
The use of Optimax was verified by two non madette personel , who i expect will post when they read this.
The car is jetted to run 150shot of Nitrous , which Mark pointed out meant 764bhp in the car on pump fuel at all times .

We then moved on to the race fuel, which made gains in Torque & horsepower & saw 600+ way past 7.5k. The gains were not spectacular however & for totb3 Mark declared 764 enough (pussy) . However a future Topspeed attempt may see us using the ' hard stuff'.
Rod
Reply