Thread: Clock removal
View Single Post
Old Apr 5, 2005 | 05:49 PM
  #6  
fireandskill1's Avatar
fireandskill1
Regular Contributor
 
Joined: Jul 2004
Posts: 283
Likes: 0
From: Poole, Dorset
Default

Yep it is the inner cable that is stuck in there, Make sure you pull from as close to the clocks as poss. I have also found it easier to put the inner cable back in again first then push the outer up and clip into place. Also it is a tad easier if you take off the steering wheel, Can be done with it on but it is a bit of a squeeze to get it past the hazard light switch and then slide it past the wheel, Good chance you could mark the dash.

Have Fun

Mike
Reply