right this will take some explaining!!!!!!!!!!!!!!
if i run a wire from the battery to the fuse holder in the fusebox for the indicators they work no probs,
but if you put the lights onto mainbeam the wires try to melt!
also with this wire connected i have power at the blower but it still doesnt work!!!!
i have the clocks etc removed an unplugged from the instrument cluster and the drivers side mainbeam stays on until you connect the instrument cluster back up doesnt go off with ignition either. also found the remains of an old immobiliser loom under dash so removed it just incase. still the same tho.
wired to the fuckin moon it is.