Originally Posted by OAP Pete

OK ive sent hear pic of a kit that you can purchase....there are many on the interenet...most are 4 door...so you only use 3 on your car....you will need to remove both front locking motors...disscard...these kits supply lots of hard wear , to fit the new motors...you should be able to connect the motors to the original operation rods...yes there will be some " Fetling " to fit...but no problem...just ensure the motors have a nice free operation, any 2 wire motor you get with the kit you purchase [ and there will be ]...use one to fit to the tailgate only....so tailgate 2 wire motor........both front motors will be 4/5 wire motors depending on the kit you get. now once you have the kit...scan the diagram which will be with the kit, and send to me on the site...then i can get back to you exactly how to wire up...you will see lots of wire comes with these kits..keep all this even though we will be useing many Ford wires...so wont need to run any wiring to doors or tailgate.....but the kit wires will have the correct terminals we will need to connect to motors...., i need to know the working of the kit you decide to purchase as there are at least 4 different circuits that can be used.. your proberly find the kit motors will latch right into the original rods in the doors... seem to remember they do...many years ago did many many conversion to fords...but im 81 now...so wait to see how you feel...and the kit you get. im on home computor but check mail regular. Peter ....... sorry now find the site wont let me send the photo....but go on Ebay Amazon there are loads