Thread: Ford orion "Honda K20 project"
View Single Post
Old 08-10-2019, 08:13 PM
  #75  
Adam Eddy
15000
 
Adam Eddy's Avatar
 
Join Date: Aug 2018
Location: Cornwall
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Default Honda K20 gone. Back to ford zetec turbo!

So, i got the grinder out again and chopped out the honda k20 mounts i made up last year, and put the k20 conversion on ebay. Ive decided to keep things ford and simple. Chosen engine is the "done to death blacktop zetec". With plans to turbo... rather than going down the usual way with the zetec/cvh mount i cut into the inner wing and made a mounting bracket there, before i welded anything in, i did check for clearance on full lock and the suspension in the maximum travel and clears fine.




No heaters in this, so matrix and heater box gone and plated.

Hydraulic clutch conversion with reinforced plate.
Adam Eddy is offline  
Reply Like