Originally Posted by
haz87
If fuel is getting to the metering unit then you have fuel... If you disconnect the pipe to the metering unit and turn on ignition to prime the system does fuel blast out?(Obviously have the line pointing into a container - use basic safety etc etc etc)
If so then you have enough fuel to at least prime the injectors.. but without a tool to measure pressure you may as well just start guessing...
Even a ebay cheapy gauge could be plumbed into that line temporarily for a couple of quid to get an idea (doesnt need to be 100% accurate just give a "good" idea)
Well my fuel pump do not prime anymore on jumps on when I put 31 and 87 togheter on the fuel pump relay (full pumps runs when I trie to idle the car but no priming when I put ignition ON)
Yes I got fuel coming out from the fuel filter .. I tried also alredy an other fuel magnetic pressure actuator nothing change
As I sayed I gonna put few gallon back in the tank ...