Righto. Quick update on the progress so far. 1800 zetec, gearbox, driveshafts, wiring loom, ecu, key and transponder and mounts are all removed from the focus. The engine will be having a tarting up and new seals, gaskets and belts fitted. I removed the top engine mount from the fiesta today to see if i can mix and match both fiesta and focus mounts. I can use the mount plate from the fiesta to bolt to the fiesta chassis, and the focus rubber bolts into the plate. Only slight modification to the mount i done was to open the hole about 1mm for the focus rubber. Obviously until the engine is in, i dont know for sure that its going to work, although i cant see why it wont.
​​​​