Hi People,


I have a 3 door RS Cosworth With 4x4 engine and L8 ECU and a brand new engine loom With Integrated fuel pump loom in it, from CW Looms.


Just finished up the wiring work today, but I have one issue.
The ECU multiplug from the car loom underneat the dash on the passenger side (LHD) have 4 wires Attached to the Connector, and they are joined together with the new Connector from the new engine loom.


My question is, where does the 3 door RS Cosworth gets the 12V battery feed from on the ECU multipug, when it's on a standard L1 loom? I can not find any cable that should have been Attached to the ECU multiplug that has 12V battery Power.