FLYWHEEL

using std 1.8cvh one, lightweight and cheap, but no trigger holes in it. that's why i'm using the std 1.8cvh crankshaft pulley too.
holes need to be bored out to 12mm.


also made these ones:


actually there were no need of these, but i was already ordering 15kg of iron at the laser cut shop.
i drawn 'em, just to save me the time necessary to make 2 holes in a piece of metal, giving myself a lord treatment.
it's made to be assembled lego like... (thanks for the idea Gianluca B.!!!)


its only use is to keep the flywheel square in the drill station vise, while boring out the bolt holes...