Originally Posted by
markk
Here is the problem, inner bell face needs machining back, bells are too thick.
If your on radial mount calipers you might be able to redrill the brackets.
I agree on the other comments, you cannot have hub centered without the material in the first place.
I make all my own bells and caliper brackets btw.
Mk can sort it problem is over new bells will be made with the spacer built into them and wheel centralising lip. A new spigot ring in the wheel will be made to go with the bells.
Last edited by ajamesc; Mar 27, 2016 at 10:49 PM.