Originally Posted by
Ben26
The plug to the motor has power and when plugged in the motor has power. The volts switch from pos to neg depending On if I press the switch up or down. The switch has a good ground and works perfectly. I even swooped the switches over but to no luck
The power to the motor is just over 12v.
Just a thought...Are you are testing the power with a multimeter or a test lamp?
A multimeter can show 12v but there is no power (amps) behind the voltage if you see what I mean.
Some diesel glow plug circuits are like this, the meter shows 12v but there is no power to light a bulb.