Originally Posted by
stevieturbo
It is completely wrong to try and quite external hose diameters and then reference them to AN anything which specifies internal diameter.
AN4 is 4/16", ie 1/4" ID etc etc
Is it o shit well my remote fluid pot to master is 7/16 and I've done it in an4! And my master to slave is 3/8 and I've done that in an3!
I got my conversion info from torques who sold me the bits!
The wilwood master is listed as 7/16 and 3/8 the bits I've used are an3 and an4 so what bits wrong as most brake and clutch fittings are them size and they fit perfect!