Originally Posted by
luke_rs1800
right im going to be making up / getting made up some braided pipes. but i need to know what internal diameter pipe to use for what...
1st off from brake and clutch reservoirs to master cylinders on the pedal box. then from the master cylinders to the bulkhead connections to copper brake lines etc.
2nd from clutch master cylinder to salve cylinder at the gearbox.
any advice would be great. thanks.
luke
-3 is typically used for all braking.
-4 would typically be used for clutch, although some might use -3.
Whilst not essential, -4 from master to reservoir would be better than -3.