Hiya Wez, your tank will look like this...
When me and my mate did mine the first time, the original idea was to fit the sender and pump from the 24v Granada tank, reason being I had read a lot about people saying the twincam 8v pump is not suitable for the 24v Cosworth engine, so I wanted to make sure and use the pump that came with the engine in the Granada.
Some people say that the 8v twincam pump is alright but I wanted to rule out any doubts while I was fitting a new tank.
BUT the unit as a whole will not fit the Sierra tank so we had to swap the pump out of the 24v unit and put it in with the sender and feed pipe from the 8v...
So, you have two choices, use the in tank set up or buy a YB pump suited tank.
I don't like the mix and match idea personally, your best off keeping it as simple as possible to rule out any possible snags you may encounter.
Good luck whatever you decide.
