Richie15

Hi all I'm running a 2.0 Zetec turbo in my mk5 zs,
I've been using a fiesta diesel gearbox but it gave up on my and clutch was on way out anyway so was time to change to my mtx box off the engine I'm using.
It's out of a late mk1 early mk2(not 100% which one) mondeo so it's the silvertop ZETEC E engine,
I've sorted mostly everything to get the box fitted but I need to know how I'm going to get a speedo reading, I know that this box gives off an electrical reading so its do-able?

I've been told I will need a speed healer from someone who has done similar but use the focus mtx box which is slightly different.

Is there an easy way around it or does anyone know of a guide for the wiring ect,
If i cannot get the speedo working will it mess with the ecu regarding speed limiters if the mk5 does have a limiter fitted?

If it's not going to affect the running of the engine I will just go ahead and get it all fitted so I can get it remapped on full power then get the speedo problem sorted later.

Thanks for any help