well been flat out with work and other things

so had no time for showing this project

so inlet manifold !!


so no chance of airbox or any decent flow
there was nothing on the market that fitted , jenvey direct to heads needed a hole in the bonnet , which was a no go with lampod

so i decided to make my own , after getting some flanges i need to form the tube to match the head .

so i made a die at work and pressed the alloy tube on it and it formed the shape of the head port

then i designed a bend as there was nothing on the shelf and got is specially bent which was quite expensive as it is alloy




then used the same throttle bodies to keep cost down



not the engine mount on this pic



not ideal but much better than before



back to the engine mount

was huge and was solid , and had cracks from stress already so i found a mount i made about 10 years ago which fits




so now need to in fill and strengthen the leg and add a mount for the inner wheel arch liner



that will do for tonight