Originally Posted by
johnenright150rst
It's a second hand one I'm putting on as ford wanted 1300 and that's trade
So It sounds abit like pot luck regarding recoding then lol
Does anyone recon these units?
What fault has it got? If it's the common brake pressure sensor as per many MK60 ABS pumps, people like BBA reman and other ECU repairers can repair them.
http://www.bba-reman.com/index.aspx
http://www.ecutesting.com/ford_focus...s_pump_mo.html
This ABS Pump Module is a very common failure for the Ford Focus & C-Max vehicles built between 2004 - 2008. The fault causes the ESP light to illuminate permanently on the instrument cluster.
If you have been for a diagnostic check on your Ford then your mechanic will probably have told you that your have a fault with your “Brake Pressure sensor” or given you the full fault code of: “C1288 PRESSURE TRANSDUCER MAIN/PRIMARY CIRCUIT FAILURE” and will probably have told you that you must change your ABS Pump Module for a small fortune
The main dealer is currently charging over one thousand pounds plus fitting for a replacement ABS pump module.
When we rebuild your ABS pump we not only correct the problem but the materials and processes we use will reinforce your ABS pump module to prevent the fault from ever reoccurring.