the rear bolts directly into place, the suspension is going to be taller as there is more weight to support but everything else is the same

on the fronts it's a bit more complicated as the tca's are longer and the hubs have a thicker shock diameter
the arb will bolt in (but gives slightly twitchy handling) as will the crossmember

the rack will also bolt in but there are conflicting reports as to weather or not you will have enough thread on it to wind the tre's in all the way or not

simple enough to tap some more threads onto the ends and/or chop some extra threads off the end of the rack though

depends on what exactly you want to swap over though, you can't use the suspension on either end though as the granada weighs about 400kgs more and the tougher suspension takes care of that