Originally Posted by coswurv

Well I made a jet up myself, used a piece of round rod about 3/4 of an inch long and drilled a 1.5mm hole in the middle, I then pushed it into some 6mm (I.d) silicone hose and connected that to compressor housing using snap ties, then the t-piece with one pipe going to actuator and 1 to electron valve, all is good now and feels pretty rapid compared to what it was like. I did try 1mm first and got boost cut instantly so went up to 1.5 and it worked for me, still won't be thrashing it about until i've fitted an afr gauge.