Originally Posted by
oldford
Which ecu do you have? L6 or L8?
Measure the signal from the TPS at idle.
For the L6 with a PF01 it must be (close to) 5.0 volt.
For the L8 with a PF09 it must be around 0.20 volt.
Hi .. thanks I know
.. but the thing is that I have a after market loom so I need to know that it's ok and therefore I hope to find out witch ECU pin (11, 17, 30) goes to the TPS pins (A, B, C) on a OE loom
