Originally Posted by
Red_bull
Wastegate open and pressure down can be done both with the same component. I think pressure down is much better then op WG all time. Take ur WG off. Mark good where it is now (length) and then make it longer. Till you almost can fit it without pulling (just a lil bit). Then your pressure will be around peak of 0.5 backing to 0.4 or sg. You have some upgrades that you don't require the 0.7 peak to 0.5 of the std
WELL GUYS
i did the DYNO test today at the result is 153.8 bhp at 5599rpm 221NM
at 30 degrre outside temperature (very hot)
i really put the acutator on my t3 stage 2 longer that i can fix it witout poulling on the wastegate
i only have 0.3 bar pressure
but i have the piper cam airtec intercooler mongoose exhaust ....hmmm i will try the MOT again like this