Thread: RollCages
View Single Post
Old May 23, 2013 | 03:03 PM
  #10  
Jay,'s Avatar
Jay,
Sponsor
iTrader: (4)
 
Joined: May 2004
Posts: 25,221
Likes: 407
From: south east
Default
Originally Posted by Straight_4_N/a
so a simple 6 point weld in cage with door bars is fine then if ive read it right.
iirc 50mmx2mm cds seem less or 45x2.5mm is msa approved but the 50mm is lighter over a whole cage
Reply
0