Hi all I am rebuilding my cvh turbo iv put new rings big end bearings and mains in and now the crank has locked up I made shore everything was clean and used the correct toque settings, I loosened the big end bolts 1 by 1 and the crank went free when I loosened cylinder 2 big end, so I re toque up the other big ends and crank span freely un till I dun up cylinder 2 big end but I didn't need to do cylinder 2 big end up all the way only needs 15nm to lock it solid

The rings went that's why I rebuilt it and the crank span freely befor I took it apart

Thanks shane