View Single Post
Old Feb 11, 2013 | 03:42 PM
  #2083  
BRAMMER's Avatar
BRAMMER
PassionFord Post Whore!!
iTrader: (23)
 
Joined: Dec 2004
Posts: 9,665
Likes: 16
From: The North
Default

Well back in the bodyshop on Monday to bond on the bodykit as tape is no good due to the panels changing shape a little when the arches were rolled.

Then it's the transmission off, the new rear seal in the box seems to be leaking so another will be fitted and i'll do the front at the same time and fit the new Vibra Technics gearbox mount. The centre bearing and rubber in the prop will be changed as i should have done it before i got the car on the road and hopefully my MK diff kit will be hear so i can bolt up my Supra diff.



Last job underneath is to fit my big 330mm rear brake kit then i think the underside is finished

Back on to the body i have been spending at DMB again, new slightly larger wing stickers for the pin stripe, new wheel gel centre badges for the Comp CXN's in a design and colour which i think looks pretty good and a complete dealer set as they now have the exact logo's and graphics for my dealer KT Dartford so had standard plates, show front plate, rear window sticker, tax disc holder and a 097 battery sticker set.

(without blue piping around the edge)





The grill seal will have to come off and be re-taped as the sodding seal has come off both sides

Both doors are being removed and repainted on the inside and the door shut's then the car will need to be flatted and polished as it picked up loads of marks when it was last worked on. The bonnet need repainting as the heat from the engine has put hairline cracks in the lacquer on the outside, you can't see them and have been there since 2009 but will need doing at some point then the reflective cover fitting to the underside.

Thats it for now - updates next week
Reply