Originally Posted by
langer
Hi yeah it's the full size transit it's a 2.2 diesel. When looking at it it looks like the injectors are held in with a bar holding two of them like. i couldn't see how the seals would come out without removing the injectors. I mustn't be looking at it properly. Iam just not wanting to pull it to bits untill I know what's what and I've got everything I need as its his work van
That's the later engine with Denso injectors then. Yes it's just a clamp that holds the injectors down. Luckily they are submerged in oil so do not corrode in like the rest of the garbage out on the roads! They should lift out nicely with a little side to side wiggle. You will have to lift them out but they should come out nice and easy.
The earlier Delphi equipped engines you could just pop the 2 pipes off, the electrical connection and swap the seals over then refit the pipes and wires. The later ones aren't quite as simple but still not bad to do.