View Single Post
Old Nov 20, 2012 | 08:09 PM
  #12  
bagginsRSturbo's Avatar
bagginsRSturbo
Advanced PassionFord User
iTrader: (1)
 
Joined: May 2012
Posts: 1,845
Likes: 38
From: SUDBURY
Default

Originally Posted by crazycage
keep it simple and it will be reliable.

id do like this because you will always want more.

2.0l blacktop engine

forged pistons and steel rods with a comp ratio of around 8-1.

bog standard head and cams but with some uprated valve springs

standard head bolts and gaskets pulleys and flywheel

standard sump

you could keep the standard focus/ mondeo inlet to a point or fit a better one

custom exhaust manifold

turbo of your choice but id go for a t34 there cheap and good upto 380hp

with it being a fiesta fit a swirle pot in the boot use the in tank pump to feed it then a 044 pump to the fuel rail.

injectors id go for vxr ones good for 350hp and there only about £80 new.(bigger if you want more power)

gearbox

id use a focus rs box with atb diff

clutch id use the focus rs one

custom shafts

management of your choice.
What sort of piston should I use as its seems to vary what people use, what sort of cash am I looking at ?
Reply