UPDATE 28/10/12


another update after doing a little bit in the shed for the car,
after blocking the oil feed hole up on the oil pump i refitted the pump and bolted the sump on propely, once that was all on i retimed the engine and fitted every thing back on, just need to make a bracket for the idiler pully to replace the p/s pump and get a belt sorted, i wanted to get the engine back in the car today but it kept on raining so hopefully i can refit it next weekend instead






after i done that i sorted out my brakes, i got a set of custom disc bells made by mk motorsport (thanks again for those mark) and bolted my discs to them with new ap bolts (just need to torque them up) once the discs where complete i botled the caliper brackets to the hubs and bolted it all together to see if all my measurments where corect and they where spot on the caliper clears the back of the wheel by about 3mm so there is plenty of space






thats about it for todays update, i have a few days off next month so hoping to have all my brakes and new hubs and shafts fitted so i can make a start on getting the car running