I've got a project 2wd cossie with no spark and theres no live to pin 20 on the ecu and the fuel pump doesn't prime when the ignition is turned on.Theres 12 volts on pin 30 at both the yellow relay plugs in the passenger footwell but the relays don't switch when the ignition is turned on,I've tried both the relays in my running car and they work.When you bridge a wire between 30+87 on the relay plugs then the pump will prime and the ecu will show 12v volts at pin 20 on the ecu??? Has anyone had this problem? There isn't an aftermarket alarm/immobiliser fitted to the car.
The car did run but one day stopped and i found a melted live (red) wire at the ignition switch so replaced that and the wire.
Any help is appreciated as its doing my head in now......