Originally Posted by HirenRS

just ralised bournemouth!, im inherts sorry mate will try and asdsist however, if it was me i no u prop tested already i would check gapping, or even better i had same prop when my gaping was incorrect i used a fiat punto 55plate and extended my cps wire with a sensor on the end ran it close to the crank pulley on fiat with my ignition on and all plugs out to stop it starting or remove fuel pump fuse, i then saw a spark when i held it close by hand isnt modest i know but it worked as a good diagnostic test, als i would check all loom earths, coilpack, all igntion related wires and connectors, edis module i dod not use a trigger wheel but i wouldnt worry as all it is doing is the same as the efi flywheel 36/1 and sends an inital signal check everything agin and again, also the wires on the cps have to be right way round had problem with this previously aswell switch them over and give it ago first before doing anything