Old Aug 11, 2012 | 10:11 PM
  #1075  
foreigneRS's Avatar
foreigneRS
Testing the future
 
Joined: Jul 2003
Posts: 17,597
Likes: 24
From: W. Sussex
Default

it's funny, back on page 14 some clever bloke said

Originally Posted by foreigneRS
i'm pretty sure a set of pistons that have suffered det over a small part of the rev range for a while will look significantly different to those that have suffered a lean mixture from insufficient fuel pressure.

i would expect the first set to have a lot of tiny indentations in them and the stress of these being created will have transferred through the rods to the crank and bearings, and the second set would probably have gone soft with the heat and changed their appearance to perhaps look a bit 'aerated'

let's see the photos of these pistons then tony.
and what do they look like? confirmed det. what a surprise

Originally Posted by Karl
I know this will upset all those who map on a rolling road, but can I just add, it is IMPOSSIBLE to map a car on the rolling road AND be confident it wont det on a high speed run on the road. I have been saying for years why I would never recommend a RR for final mapping. It is an ideal diagnostic tool, but cannot in any shape or form represent either the load or air flow achieved at 180mph! FACT!

What this means is that people who have their cars mapped on a RR must accept that det is a real risk when using the car in the real world. FACT!
what do you know about it? you're wrong if the airflow and temperature is good, danny says so

Originally Posted by 750hp escos
As for cooling etc iv already said the inlet temps and ambient temps were good so no concern there either..

The fan in the dyno cell was always good and the cool air drawn from outside blown straight in front of the main cooling fan..the cell was always good for that especially when in horsham...
that's alright then, no worries about temperature on that dyno then. oh hang on...

Originally Posted by Moonstone Steve.
From what I can gather excess heat can cause it, maybe its time to bring out a quote from Luke whilst he was mapping it and before he gave it his last blast on the rollers he said" I better let it cool down for a bit as its getting fucking hot" which he did and had a fag and cuppa then proceeded.

Steve
Reply