Originally Posted by
Adam31
The manifolds, turbo, inj etc will all fit no problem. Straight swap, I have them on a silvertop in a mk3 fiesta.
I am sure you will need to fit a 2 part sump from the blacktop to use the standard FRS downpipe but you may need to confirm that.
The intercooler/charge cooler setup may fit depends on what car it is going into?probably better to upgrade to a proper air to air intercooler and custom pipes etc.
Thanks for the quick reply, well I have the Milltek FRS downpipe, which will need a little fabbing to fit properly, all of the FRS parts that I have came from a Mondeo Mk2 project with the 2.0 Blacktop unit, it will be going into My Mk1 Mondeo with the Silvertop unit, so almost like for like, I am looking to use the Fez RS1800 HO inlet. I have a decat too but that will be fitted just before the remap.
I have two injection rails with injectors from the FRS (one spare) and hope its not to much of a pita to fit?