Since the engine and box where ready to go in it was time to remove the twincam. So up on a two post lift and removed the exhaust and front suspension.



Prop removed.



Disconnecting everything from the engine.





After that the bolts from the subframe and gearbox mount were loosened. The car was going to go up with the lift leaving the engine and box on the trolley.





And of course we forgot a wire.



Out with the twincam.





Empty engine bay...



Rolled the 2.9 12v underneath using the same trolley.





Then lowered the car back over the engine and bolted it back and refitted the prop.





Still some time left to fit the radiator.



But after that it was time to call it a day.