Guys, I have recently been told that my 'Inlet Manifold Runner' was stuck open.

Upon investigation I had found that the Return cam on the shaft had come off.

I repositioned it and loaded up the spring to open it when not being pulled by the cable.

I have discovered to day that is has come off and the return spring has gone missing, as I didn't know until reading these threads that a star washer should have been used to secure it in postion.

I have now orderd a new cam and clip from my local dealer, Vospers of Plymouth, but they don't know if the spring comes in the kit.

Does anyone know if it does and if not, where can I get one?