Originally Posted by
scarabman
i made my own exhaust using the mig stainless wire and argoshield light,unless you use pure argon it will be slightly black but works perfectly well.turn the amps and wire feed up and pulse weld it.it will spatter unless you use anti spatter spray.if you going for a shiney magazine look exhaust then its worth using some.
It only splatters badly if using far too much wire/current. When the settings are right and workpiece nice and clean before welding, there should be virtually no splatter And gas really makes little difference. Ive tried both.
You're weld is quite obvious in the photo ( not making a dig BTW as it's probably neater than a lot of mine lol ), but the weld to the right is also MIG'd