Originally Posted by ajamesc

I started to fit mine the other day what an arse to
do lol. I couldent get the cover on with the trumpet section still on the engine so had to remove that and fit it all as one as the abs pipes were in the way! but even then i had to mod the holes with my die grinder to get them to fit over the studs in the head (so it could fit on all in one piece). Also i wasent very impressed with the quality of the plenum the m6x1mm bolts they sent were to long plus it was like screwing them into butter! i had to heli coil all 10!. Finaly got it on then it was a total arse to get throttle body on with the bracket they supplyed also had the cut all 4 throttle body bolts down as the hole were no deep enough in the new plunum. I will have to move the power stearing bottle too as its now in the way of the throttle body and will have to mod the power stearing pump too so ill mod it too take a bango bolt there is no way ill get a hose over the standard tail thats on the pump with the throttle body on and i will have to have my intercooler modded aswell but its on and will be finished next week