Originally Posted by
martysmartie
You need to supply the ignition live feed, i.e. position 2 to a push to make switch and then from the push to make switch to the remote starter wire on ignition position 3.
Using the correct gauge of wire of course.
Red will be "Hot all the time" It's either the Blue/Black or yellow and black for the ignition and the starter is the other or vice versa, can't remember off hand!
Check for sure using a meter!
Martin
EDIT: I just read that again.Just to clarify the yellow wire is live on position 1. The red wire is constantly live with the ignition off. The black wire is live on position 2(dash lights on). The blue/black wire is live when you turn the engine on pos 3. So going from what you said it's the black wire and the blue/black wire that I need to wire the switch to?