Originally Posted by
martysmartie
You need to supply the ignition live feed, i.e. position 2 to a push to make switch and then from the push to make switch to the remote starter wire on ignition position 3.
Using the correct gauge of wire of course.
Red will be "Hot all the time" It's either the Blue/Black or yellow and black for the ignition and the starter is the other or vice versa, can't remember off hand!
Check for sure using a meter!
Martin
Ok so i checked with the meter and when you turn the key forward to turn the engine the blue/black is reading on the meter. The other red,yellow and black are live with the ignition on or position 2 as you say. So i gather from what you're saying that i need to have the red wire going to the push switch and the other side of the push switch going to the blue/black pos 3 wire?