Originally Posted by
stevealien
you cant lower boost with a bleed valve???
of course you can
it allows you to fine tune your boost,with mine i can turn it down to almost sod all and up to over 25
agreed you need to set the correct preload on your actuator too,so you have to stretch the actuator rod about 3 or 4mm to get it on.
No, you have miss-understood what I have explained.
if you have your actuator set to 20 psi, and you fit a bleed valve...you cannot lower the boost below 20psi...as it is a BLEED, so even fully closed you will have minumum 20psi.
HTH
