Originally Posted by
Omawarisan
How did you lower yours ? I want to lower mine but it must still be able to carry the same weight as I some times fill mine with bags of plaster !
I used FOCUS RS front springs,cups,bearings and mounts with connect shocks.The connect springs have a pig tail end so you need to use the focus rs cups and mounts and the connect shocks are tappered into the hub so you can,t just put a FOCUS RS leg on.
But you will get away with st shocks and lowered springs on yours if your using st170 hubs
The rear is harder to lower,you need to take the beam off,measure the leaf spring plates and replicate them exactly 180 degrees on the underneath so the leaf spring sits on the bottm not the top,here,s my beam done but not moved the leafs underneath yet.
