Okay so I've fitted my loom to my engine, the live feed and coil wires are on and all other plugs/ earth.
The main live feed,ignition and fuel pump are all on inside, and I have set the crank sensor gap and checked all leads are in the right order.
It cranks over but wont fire I have a spark at the coil and all four leads, just not sure what's wrong .

Also I have checked the feeds with a test light at the dizzy and crank sensor and they don't seem to have a live feed.? however the ignition module does, and so has the tps sensor but it is a very dim feed.?

Any help would be great thanks..